714 Mulch Tiller
- Control residue in one time-saving pass....more
- Two-bar or three-bar frames available....more
- Long, narrow hitch for good maneuverability in tight headlands....more
- Coulter or disk gangs are available....more
- Simple gang depth adjustment....more
- Choice of rigid, spring-reset or Tru-Depth™ standards....more
- Variety of ground-engaging tools available to match conditions....more
- Crank-adjust depth control available for 3-bar models....more
 |
||||
| MANUFACTURER | John Deere | |||
|
||||
| MODEL | 714 Mulch Tiller | |||
|
||||
| No. of Standards | 5, 7, 9, 11, 13, 15, 17 | |||
| ||||
| Working Width, ft. (m) | ||||
| ||||
| Narrow 5-10 ft. | 6-3, 8-9 > 2 Bar | |||
| ||||
| Medium 11-15 ft. | 11-3, 13-9 > 2 & 3 Bar | |||
| ||||
| Wide 16-25 ft. | 16-3 > 3 Bar | |||
| ||||
| Narrow 10-20 ft. | 18-9 > 3 Bar | |||
| ||||
| Medium 21-25 ft. | 21-3 > 3 Bar | |||
| ||||
| Standards | ||||
| ||||
| Type | Tru-Depth | |||
| ||||
| Trip Force, lbs. | 1250 | |||
| ||||
| Trip Height, in. | 11 | |||
| ||||
| Maximum Operating Depth, in. | 11 | |||
| ||||
| Underframe Clearance, in. | 32 | |||
| ||||
| Type | Spring-Reset | |||
| ||||
| Trip Force, lbs. | 650 | |||
| ||||
| Trip Height, in. | 10 | |||
| ||||
| Maximum Operating Depth, in. | 11 | |||
| ||||
| Underframe Clearance, in. | 32 | |||
| ||||
| Type | Rigid | |||
| ||||
| Maximum Operating Depth, in. | 11 | |||
| ||||
| Underframe Clearance, in. | 32 | |||
| ||||
| Standard Engaging Components | ||||
| ||||
| Option 1 | 3x24 Twt concave | |||
| ||||
| Option 2 | 4x24 Twt concave | |||
| ||||
| Option 3 | 2x14 Chrome carbide | |||
| ||||
| Sweeps/Shovels | 18 in. Tru-Width | |||
| ||||
| Depth Control | Crank adjustable single point | |||
| ||||
| Standard Spacing, in. | 15 | |||
| ||||
| Gangs | ||||
| ||||
| Type | Disk or coulter | |||
| ||||
| Blade Size, in. | 20 x 0.256 | |||
| ||||
| Coulter Size, in. | 20 x 0.197 | |||
| ||||
| Blade/Coulter Spacing, in. | 9 | |||
| ||||
| Type of Scrapers | Rigid Bar | |||
| ||||
| Type of Protection | Coil Spring | |||
| ||||
| Recommended Operating Speed, mph (kph) | 5 to 7 (8 to 11) | |||
| ||||
| Transport Width (ft.-in.) | ||||
| ||||
| 5 Standard | 6-0 | |||
| ||||
| 7 Standard | 8-9 | |||
| ||||
| 9 Standard | 12-0 | |||
| ||||
| 11 Standard | 14-0 | |||
| ||||
| 13 Standard | 16-6 | |||
| ||||
| 15 Standard | 14-4 | |||
| ||||
| 17 Standard | 14-4 | |||
| ||||
| Horsepower Requirements (hp) | 12 to 20 hp per shank | |||
| ||||
| 5 Standard | 60 - 100 | |||
| ||||
| 7 Standard | 84 - 140 | |||
| ||||
| 9 Standard | 108 - 180 | |||
| ||||
| 11 Standard | 132 - 220 | |||
| ||||
| 13 Standard | 156 - 260 | |||
| ||||
| 15 Standard | 180 - 300 | |||
| ||||
| 17 Standard | 204 - 400 | |||
| ||||
| Specifications subject to change. Please contact your local dealer for more detailed information. | ||||