726 Mulch Finisher
- Four tillage operations in one pass....more
- Widths available to match acreage and horsepower requirements....more
- Available in 9-in. or 7-in. shank spacing to match residue-handling requirements....more
- Level-lift hitch ensures level operation through all operating depths....more
- Crank-adjust single-point depth control is standard equipment....more
- TouchSet™ depth control available for 7720, 7820, 7920 (IVT transmission only), 8000, and 9000 Series John Deere tractors....more
- Low-concavity disks are spaced 7-1/2-in. apart for effective residue slicing....more
- TruPosition™ standards are backed by a 3-year warranty....more
- A complete line of sweeps are available....more
 |
||||
| MANUFACTURER | John Deere | |||
|
||||
| MODEL | 726 Mulch Finisher | |||
|
||||
| Working Widths, ft.-in. | ||||
| ||||
| Rigid | 12-9, 15-9 | |||
| ||||
| Rigid Folding | 18-9 | |||
| ||||
| Narrow Mainframe (Flex) | 18-9, 21-9, 24-9 | |||
| ||||
| Wide Mainframe (Flex) | 27-9, 33-9, 38-3 | |||
| ||||
| Standard Spacings | 7 and 9 | |||
| ||||
| Hitch | ||||
| ||||
| Standard | Level-Lift | |||
| ||||
| Operation | ||||
| ||||
| Recommended Operating Speed, mph | 5 to 7 | |||
| ||||
| Base Equipment | Crank Adjust Single Point | |||
| ||||
| Optional Equipment | Touchset Depth Control | |||
| ||||
| Standard Specifications | ||||
| ||||
| 1st Type of Standard | Tru-Position C-Shank | |||
| ||||
| Trip Force, lb. | 135 | |||
| ||||
| Trip Height, in. | 10 | |||
| ||||
| Maximum Operating Depth, in. | 5 | |||
| ||||
| Underframe Clearance, in. | 24 | |||
| ||||
| 2nd Type of Standard | Tru-Position C-Shank | |||
| ||||
| Trip Force, lb. | 150 | |||
| ||||
| Trip Height, in. | 10 | |||
| ||||
| Maximum Operating Depth, in. | 5 | |||
| ||||
| Underframe Clearance, in. | 24 | |||
| ||||
| Ground Engaging Components | ||||
| ||||
| 9 in. Standard Spacing | 10 in. Tru-Width | |||
| ||||
| 7 in. Standard Spacing | 9 in. Tru-Width | |||
| ||||
| Disk Gangs | ||||
| ||||
| Base Equipment | Manual Ratchet Turnbuckle | |||
| ||||
| Optional Equipment | Hydraulic | |||
| ||||
| Maximum Depth, in. | 5 (even with sweep) | |||
| ||||
| Vertical Adjustment, in. | 8 | |||
| ||||
| Gang Angle, degrees | 8 | |||
| ||||
| Blade Size, in. | 20 x 0.177 Low Concavity | |||
| ||||
| Blade Spacing, in., | 7.25 | |||
| ||||
| Type of Scrapers | Combination | |||
| ||||
| Type of Spool | Steel Fabricated | |||
| ||||
| Bearings | Dura-Flex | |||
| ||||
| Spray Attachments | Yes | |||
| ||||
| Rear Attachments | ||||
| ||||
| Spring Tine Harrow | Yes | |||
| ||||
| Number of Bars | 5 | |||
| ||||
| Spike Tooth Harrow | Yes | |||
| ||||
| Number of Bars | 5 | |||
| ||||
| Spike Size, in. | 3/4 x 3/4 x 10 | |||
| ||||
| Rolling Basket w/Spike Harrow | Yes | |||
| ||||
| Basket Diameter, in. | 11 | |||
| ||||
| Number of Harrow Bars | 3 | |||
| ||||
| Spike Size, in. | 3/4 x 3/4 x 10 | |||
| ||||
| Rolling Basket w/Spring-Tine Harrow | No | |||
| ||||
| Transport Dimensions | ||||
| ||||
| Rigid | 14-5, 16-6 | |||
| ||||
| Rigid Folding | 12-6 | |||
| ||||
| Narrow Mainframe (Flex) | 12-6 | |||
| ||||
| Wide Mainframe (Flex) | 17-6, 17-8 | |||
| ||||
| Rigid Folding | 9-2 | |||
| ||||
| Narrow Mainframe (Flex) | 9-2, 12-0 | |||
| ||||
| Wide Mainframe (Flex) | 11-2, 16-3 | |||
| ||||
| Specifications subject to change. Please contact your local dealer for more detailed information. | ||||