7820 Tractor (155 hp)

- Key new features....more
- Engines meet all Tier II EPA emissions standards....more
- John Deere Infinitely Variable Transmission (IVT™)....more
- Available ComfortCommand™ seat....more
- CommandCenter provides operator with instant tractor information....more
- Implement management system (IMS) allows tractor to execute learned sequences of tractor functions....more
- Improved hydraulic system with 16 percent more hydraulic capacity....more
- 7020 Series tractors are GreenStar™ Ready to take advantage of John Deere precision farming....more
- Two wheel drive (non-powered) and mechanical front wheel drive (MFWD) options....more
- Triple-link suspension II (TLS II) provides unparalleled axle performance....more
- PTO options and improved changeover to meet customer needs....more
- Available factory installed loader....more
- More tire and wheel options....more
| MANUFACTURER | John Deere | |||
| MODEL | 7820 Tractor (155 hp) | |||
| Official Test | Nebr. OECD 1834, Summary #426 | |||
| Engine | ||||
| Manufacturer | John Deere | |||
| Aspiration | Turbo & Air to Air Intercooled | |||
| Cylinders/Displacement, cu. in. (liters) | 6/496 (8.1) | |||
| Cylinder Liners | Wet | |||
| Standard | 103 (390) | |||
| Optional | 94.7 (358) with opt. right-hand door | |||
| Performance | ||||
| Advertised PTO HP (kW) @ Rated RPM | 155 (115) @ 2100 | |||
| Official PTO HP (kW) @ Rated RPM | -- | |||
| @ Standard PTO @ Eng RPM | 156.55 (116.74) @ 2101 | |||
| Maximum @ Eng RPM | 174.31 (129.99) @ 1850 | |||
| Advertised Engine HP (kW) @ Rated Speed | -- | |||
| Max Unballast Drwbr HP (kW) @ Eng RPM | 159.29 (118.78) @ 1847 | |||
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) | 616 (835) @ 1150 | |||
| Max Torque Rise (80% Rtd Spd) @ Eng RPM | 38.0% @ 1700 | |||
| Maximum Torque Rise % (PTO) @ Eng RPM | 57.1% @ 1150 | |||
| Fuel Use, U.S.Gal/hr & HP hr/gal at: | ||||
| PTO @ Rated Eng RPM | 09.36 (35.44) & 16.72 (3.29) @ 2101 | |||
| Standard PTO Speed @ Eng Speed | 09.36 (35.44) & 16.72 (3.29) @ 2101 | |||
| Maximum PTO Power @ Eng RPM | 09.55 (36.15) & 18.25 (3.60) @ 1850 | |||
| Maximum Engine Power @ Eng RPM | 09.48 (35.89) & 15.14 (2.98) @ 2094 | |||
| Max Unballasted Drawbar Power@Eng RPM | 09.41 (35.62) & 16.92 (3.33) @ 1847 | |||
| 75% Load, Full Engine RPM (Unballasted) | 08.61 (32.59) & 12.97 (2.56) @ 2157 | |||
| 75% Load @ Reduced RPM (Unballasted) | 06.89 (26.08) & 16.21 (3.19) @ 1624 | |||
| Transmission | *This tractor was tested w/AutoQuad Plus | |||
| Std Transmission; Forward/Reverse | PowrQuad Plus 16F/16R | |||
| Opt Transmission; Forward/Reverse | PQ Plus 20F/20R, AutoQuad 20F/20R or IVT | |||
| Left-Hand Reverser | Standard | |||
| On-the-Go Shifting (Yes/No/Partial) | Yes | |||
| Direction Reverser; Forward/Reverse | Power | |||
| Clutch; Wet/Dry | Wet | |||
| Creeper | IVT | |||
| Power Take-Off (PTO) | ||||
| Standard | 13/4 1000, cap of 1 3/8 540/1000 w/o kit | |||
| Optional | 1-3/4 1000 or 1-3/8 540/1000 with kit | |||
| Speeds @ RPM | 540 @ 1950; 1000 @ 1950 | |||
| Control | Electronic | |||
| Hydraulics | ||||
| Type | Closed Ctr. - Pres. & Flow Compensated | |||
| Standard | 32 (121.2) | |||
| Optional | none | |||
| Rated Flow @ One SCV, GPM (L/min) | 30 (114 L/min) | |||
| Max Output @ SCV Couplers, GPM (L/min) | 32.1 (121.7 l/min) | |||
| Maximum Operating Pressure, PSI (kPa) | 3046 (2100) | |||
| Maximum Hydraulic Power, HP (kW) | 47.2 (35.2) | |||
| Draft Control Type | Electrohydraulic | |||
| Remote Control Valves Available | 4 rear, 2 Mid-Mounts + 1 on/off-(max.7) | |||
| Hitch Category (SAE Designation) | 3/3N | |||
| Standard | 10,050 (4559) | |||
| Optional | 14,000 (6350) | |||
| Sensing Type | Lower Link | |||
| Final Drive | ||||
| Type | Inboard Planetary | |||
| Differential Controls | Electrohydraulic | |||
| Front | Yes | |||
| Front & Rear | Yes | |||
| Engage On-the-Go Rear Differential Lock | Yes | |||
| Operator Station | ||||
| Rigid - Foldable - Telescopic | -- | |||
| Platform - Flat/Straddle | -- | |||
| Gearshift Location - Console/Floor | Std.- Console, Opt.- Armrest w/IVT | |||
| Doors | 1 std., Right Hand door optional | |||
| Platform - Flat/Straddle | -- | |||
| dB(A) Rating | 72.0 | |||
| Seat Suspension System | Air / Active Seat optional | |||
| 2WD Dimensions | ||||
| Wheelbase, in. (mm) | 112.6 (2860) | |||
| Front Tread Range, in. (mm) | 60-88 (1523-2234) | |||
| Rear Tread Range, in. (mm) | 59.6-108.3 (1514-2751) | |||
| Minimum Rear Tread Setting, in. (mm) | 59.6 (1514) | |||
| Front Axle Clearance, in. (mm) | 25.6 (650) w/11.00-16, F2 front tires | |||
| Turning Radius w/Brakes, ft. (m) | -- | |||
| Turning Radius w/o Brakes, ft. (m) | 15.1 (4.60) @ 60 in. tread | |||
| Unballasted Operating Weight, lb. (kg) | 16,200 (7257) | |||
| Approx. Ship Wgt, lb.(kg) Open; Cab | 16,200 (7257) | |||
| MFWD Dimensions | ||||
| Wheelbase, in. (mm) | 112.6 (2860) | |||
| Front Tread Range, in. (mm) | 60-88 (1523-2234) | |||
| Front Axle Clearance, in. (mm) | 24.5 (622) w/380/80R38, R1 front tires | |||
| Turning Radius w/Brakes, ft. (m) | -- | |||
| Turning Radius w/o Brakes, ft. (m) | 19.7 (6.0) w/16.9R30, no fenders | |||
| Limited Slip Differential | Optional | |||
| Unballasted Operating Weight, lb. (kg) | 17,102 (7756) w/PQ+ or AQ+ | |||
| Approx. Ship Wgt, lb. (kg) Open; Cab | 17,102 (7756) w/PQ= or AQ+ | |||
| 4WD Dimensions | MFWD w/ TLS & IVT | |||
| Wheelbase, in. (mm) | 112.6 (2860) | |||
| Wheel Tread, Min. to Max. in. (mm) | 59.6-108.3 (1514-2751) | |||
| Turning Radius w/o Brakes, ft. (m) | 19.7 (6.0) w/16.9R30, no fenders | |||
| Neb. Test Unballasted w/Duals, lb.(kg) | 17,045 (7895) | |||
| Unballasted Weight, lb. (kg) | 17,603 (7983) w/IVT | |||
| Standard Tires | ||||
| Front | 11.00-16 in. 8 PR (F2) | |||
| Rear | 480/80R42 151A8 (R1) | |||
| Front | Front tire is an option | |||
| Rear | 480/80R42 151A8 (R1) | |||
| 4WD | -- | |||
| Track Widths | -- | |||
| Miscellaneous | ||||
| Underhood Muffler | Yes | |||
| Joystick SCV Control | Yes | |||
| Inboard Planetary | Yes | |||
| Axle Type | Rack & Pinion | |||
| Brakes - Type and Control | Hydraulic Wet Disk | |||
| Country of Manufacture | Waterloo, Iowa USA | |||
| Ballasting Restrictions, lb. (kg) | -- | |||
| Specifications subject to change. Please contact your local dealer for more detailed information. | ||||