 |
MANUFACTURER
MODEL
|
John Deere
7730 152 PTO hp
|
|
| Official Test |
|
|
Nebraska Test Number |
1894
|
|
|
| Engine |
|
|
Manufacturer |
John Deere
|
|
|
|
Aspiration |
Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled
|
|
|
|
Cylinders/Displacement, cu. in. (liters) |
6/414 (6.8)
|
|
|
|
Cylinder Liners |
Wet
|
|
|
|
Fuel Tank Cap., US Gal. (L) (Open; Cab) |
---
|
|
|
|
|
Standard |
103 (390) without right hand step
|
|
|
|
|
Optional |
94 (356) with right hand step
|
|
|
|
Underhood muffler |
---
|
|
|
| Performance |
|
|
Advertised PTO HP (kW) @ Rated RPM |
152 (113) @ 2100
|
|
|
|
Official PTO HP (kW) @ Rated RPM |
153.29 (114.31) @ 2100
|
|
|
|
|
@ Standard PTO @ Eng RPM |
168.19 (125.42) @ 1954
|
|
|
|
|
Maximum @ Eng RPM |
172.51 (128.64) @ 1900
|
|
|
|
Advertised Engine HP (kW) @ Rated Speed |
190 (142) @ 2100
|
|
|
|
Max Unballast Drwbr HP (kW) @ Eng RPM |
139.10 (103.73) @ 2099
|
|
|
|
Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
564 lb-ft (764) @ 1600
|
|
|
|
Max Torque Rise (80% Rtd Spd) @ Eng RPM |
38% @ 1698
|
|
|
|
Maximum Torque Rise % (PTO) @ Eng RPM |
47.1% @ 1600
|
|
|
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
|
PTO @ Rated Eng RPM |
9.0, 17.03
|
|
|
|
Standard PTO Speed @ Eng Speed |
9.48, 17.75
|
|
|
|
Maximum PTO Power @ Eng RPM |
9.6, 17.98
|
|
|
|
Maximum Engine Power @ Eng RPM |
---
|
|
|
|
Max Unballasted Drawbar Power @ Eng RPM |
15.02 HP hr/gal @ 2099
|
|
|
|
75% Load, Full Engine RPM (Unballasted) |
13.98 HP hr/gal @ 2160
|
|
|
|
75% Load @ Reduced RPM (Unballasted) |
15.22 HP hr/gal @ 1632
|
|
|
| Transmission |
|
|
Std. Transmission; Forward/Reverse |
PowrQuad PLUS (30K); 16F/16R
|
|
|
|
Opt. Transmission; Forward/Reverse |
AutoQuad PLUS (40K/50K), IVT (40K/50K)
|
|
|
|
Reverser |
Left-hand (LH or RH with IVT)
|
|
|
|
On-the-Go Shifting (Yes/No/Partial) |
Partial
|
|
|
|
Clutch; Wet/Dry |
Wet
|
|
|
|
Creeper |
IVT
|
|
|
| Power Take-Off (PTO) |
|
|
Standard |
1-3/8-in. 540/1000
|
|
|
|
Optional |
1-3/4-in. 1000 or 1-3/8-in. 540E/1000/1000E
|
|
|
|
PTO Speeds @ Engine RPM |
540 or 1000 @ 1950; 540E or 1000E @ 1750
|
|
|
|
PTO Actuation |
Electro-hydraulic
|
|
|
| Hydraulics |
|
|
Type |
Closed center, pressure & flow compensated
|
|
|
|
Pump Rated Output, GPM (L/min.) |
---
|
|
|
|
|
Standard |
32 (121.1)
|
|
|
|
|
Optional |
45 (170.3)
|
|
|
|
Rated Flow @ One SCV, GPM (L/min.) |
31.4 (118.9) std., 41.4 (156.7) opt.
|
|
|
|
Max Output @ SCV Couplers, GPM (L/min.) |
32 (121.1) std., 45 (170.3) opt.
|
|
|
|
Maximum Operating Pressure, PSI (kPa) |
2914 (20091) std., 2895 (19960) opt.
|
|
|
|
Maximum Hydraulic Power, HP (kW) |
46.9 (35) std., 65.9 (49.1) opt.
|
|
|
|
Hitch Draft Control Load Sense Type |
Electronic
|
|
|
|
Remote Control Valves Available |
2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt.
|
|
|
|
Hitch Category (SAE Designation) |
3/3N
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
---
|
|
|
|
|
Standard |
10,987 (4,983)
|
|
|
|
|
Optional |
15,574 (7,064)
|
|
|
|
Sensing Type |
Electro-hydraulic
|
|
|
|
Joystick SCV Control |
Opt. Mechanical or Electro-hydraulic
|
|
|
| Final Drive |
|
|
Type |
Inboard Planetary
|
|
|
|
Differential Controls |
Electro-hydraulic
|
|
|
|
Availability |
---
|
|
|
|
|
Front |
---
|
|
|
|
|
Front & Rear |
---
|
|
|
|
Engage On-the-Go Rear Differential Lock |
Yes
|
|
|
|
Axle Type |
Bar axle, rack and pinion
|
|
|
|
Brakes, Type and Control |
Hydraulic wet disk
|
|
|
| Operator Station |
|
|
Rollover Protective Structure, OOS |
---
|
|
|
|
|
Rigid - Foldable - Telescopic |
---
|
|
|
|
|
Platform - Flat/Straddle |
---
|
|
|
|
|
Gearshift Location - Console/Floor |
---
|
|
|
|
Cab |
---
|
|
|
|
|
Doors |
LH std., RH opt.
|
|
|
|
|
Platform - Flat/Straddle |
Flat
|
|
|
|
|
dB(A) Rating |
68.2
|
|
|
|
|
Seat Suspension System |
Air std., Active Seat opt.
|
|
|
| 2WD Dimensions |
|
|
Wheelbase, in. (mm) |
116.8 (2967)
|
|
|
|
Front Tread Range, in. (mm) |
60-88 (1523-2234)
|
|
|
|
Rear Tread Range, in. (mm) |
59.6 - 108.3 (1514-2751)
|
|
|
|
Minimum Rear Tread Setting, in. (mm) |
59.6 (1514)
|
|
|
|
Front Axle Clearance, in. (mm) |
25.6 (650) with 11.00-16 F2 front tires
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
--
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
15.1 (4.6)
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
---
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
15,360 (6,967)
|
|
|
| MFWD Dimensions |
|
|
Wheelbase, in. (mm) |
112.6 (2860)
|
|
|
|
Front Tread Range, in. (mm) |
60-88 (1523-2234)
|
|
|
|
Front Axle Clearance, in. (mm) |
24.5 (622) with 380/80R38 R1 front tires
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
--
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
16.75 (5.1) with 420/90R30 R1 front tires
|
|
|
|
Limited Slip Differential |
Limited slip or hydraulic differential lock available
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
---
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
16,502 (7,484) w/ PQ+ or AQ+ MFWD; 17,131 (7,770) w/ IVT MFWD
|
|
|
| 4WD Dimensions |
|
|
Wheelbase, in. (mm) |
---
|
|
|
|
Wheel Tread, Min. to Max. in. (mm) |
---
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
---
|
|
|
|
Nebraska Test Unballasted w/Duals, lb.(kg) |
---
|
|
|
|
Unballasted Weight, lb. (kg) |
---
|
|
|
| Standard Tires |
|
|
2WD |
---
|
|
|
|
|
Front |
11.00-16 (F2)
|
|
|
|
|
Rear |
480/80R42 (R1)
|
|
|
|
MFWD |
---
|
|
|
|
|
Front |
options available
|
|
|
|
|
Rear |
480/80R42 (R1)
|
|
|
|
4WD |
---
|
|
|
|
Track Widths |
---
|
|
|
| Miscellaneous |
|
|
Country of Manufacture |
Waterloo, Iowa USA
|
|
|
|
Ballasting Restrictions, lb. (kg) |
--
|
|
|
|
*Notes |
Updated - 10/07
|
|
|
