6415 Utility Tractor (85 hp)

- High-torque PowerTech™ engine delivers up to 51 percent torque rise....more
- Efficient cooling system meets emission regulations while maintaining high-quality performance....more
- Coolant-cooled charge air cooler improves fuel efficiency....more
- SyncroPlus™ transmission with 12 forward/4 reverse speeds with shift-on-the-go capabilities....more
- Optional SyncroPlus™ 16/16 transmission with mechanical left-hand power reverser (6215, 6415, 6615, and 6715)....more
- Modulated dual 540/1000 rpm rear PTO delivers smooth, shock-free engagements....more
- John Deere load sensing constant flow hydraulic system....more
- Category 2, 3-point hitch with hitch dampening stand delivers high hitch lifting capacity....more
- Electronic hitch control improves operator productivity....more
- Optional MFWD with 52-degree turn angle delivers tight turns and upfront power....more
- Optional ComfortVantage™ cab....more
| MANUFACTURER | John Deere | |||
| MODEL | 6415 Utility Tractor (85 hp) | |||
| Official Test | Factory Estimated | |||
| Engine | ||||
| Manufacturer | John Deere | |||
| Aspiration | Turbocharged | |||
| Cylinders/Displacement, cu. in. (liters) | 4/276 (4.5) | |||
| Cylinder Liners | Wet | |||
| Standard | 43.6 (165) | |||
| Performance | ||||
| Advertised PTO HP (kW) @ Rated RPM | 85.0 (63.4) @ 2300 | |||
| Maximum Torque Rise % (PTO) @ Eng RPM | 45.9% @ 1400 | |||
| Fuel Use, U.S.Gal/hr & HP hr/gal at: | ||||
| Transmission | ||||
| Std Transmission; Forward/Reverse | Synchronized 12/4 | |||
| Opt Transmission; Forward/Reverse | Sync. 16/16, LH Reverser | |||
| Left-Hand Reverser | Yes, Std. w/Syncro 16/16 | |||
| On-the-Go Shifting (Yes/No/Partial) | Yes | |||
| Direction Reverser; Forward/Reverse | Shuttle | |||
| Clutch; Wet/Dry | Wet | |||
| Creeper | Syncro 12/4 w/9/3 Creeper | |||
| Power Take-Off (PTO) | ||||
| Standard | Independent 540/1000 | |||
| Speeds @ RPM | 540/1000 @ 2208 | |||
| Control | Electrohydraulic | |||
| Hydraulics | ||||
| Type | Constant Flow Load Sensing | |||
| Standard | 17.5 (66.2) | |||
| Rated Flow @ One SCV, GPM (L/min) | 17.5 (66.2) | |||
| Maximum Operating Pressure, PSI (kPa) | 2500 (17,236) | |||
| Draft Control Type | Lower Link | |||
| Remote Control Valves Available | 1, 2, 3, or 4 | |||
| Hitch Category (SAE Designation) | 2 | |||
| Standard | 5028 (2282) | |||
| Optional | No | |||
| Sensing Type | Electronic Lower Link | |||
| Final Drive | ||||
| Type | Inboard Planetary | |||
| Differential Controls | Electrohydraulic | |||
| Front | Yes | |||
| Front & Rear | Yes | |||
| Engage On-the-Go Rear Differential Lock | Yes | |||
| Operator Station | ||||
| Rigid - Foldable - Telescopic | Foldable, 2-Post | |||
| Platform - Flat/Straddle | Flat | |||
| Gearshift Location - Console/Floor | Console | |||
| Doors | 2 | |||
| Platform - Flat/Straddle | Flat | |||
| dB(A) Rating | 76 | |||
| Seat Suspension System | Mechanical | |||
| 2WD Dimensions | ||||
| Wheelbase, in. (mm) | 94.5 (2400) | |||
| Front Tread Range, in. (mm) | 58.7-80.4 (1491-2041) | |||
| Rear Tread Range, in. (mm) | 63.5-79.3 (1612-2012) | |||
| Minimum Rear Tread Setting, in. (mm) | 63.5 (1612) | |||
| Turning Radius w/o Brakes, ft. (m) | 13.9 (4.24) | |||
| Unballasted Operating Weight, lb. (kg) | 7695 (3490) | |||
| Approx. Ship Wgt, lb.(kg) Open; Cab | 7695 (3490); 8582 (3893) | |||
| MFWD Dimensions | ||||
| Wheelbase, in. (mm) | 94.5 (2400) | |||
| Front Tread Range, in. (mm) | 59.7-79.4 (1516-2016) | |||
| Front Axle Clearance, in. (mm) | 18.7 (47.5) | |||
| Turning Radius w/o Brakes, ft. (m) | 14.7 (4.48) | |||
| Limited Slip Differential | Standard | |||
| Approx. Ship Wgt, lb. (kg) Open; Cab | 8103 (3675); 8987 (4085) | |||
| 4WD Dimensions | ||||
| Standard Tires | ||||
| Front | 10.00-16 | |||
| Rear | 18.4-34 | |||
| Front | 12.4-24 | |||
| Rear | 18.4-34 | |||
| Miscellaneous | ||||
| Underhood Muffler | Yes | |||
| Joystick SCV Control | Yes | |||
| Inboard Planetary | Yes | |||
| Axle Type | Flanged | |||
| Brakes - Type and Control | Hydraulic Wet Disk | |||
| Country of Manufacture | Germany | |||
| Specifications subject to change. Please contact your local dealer for more detailed information. | ||||